Product of West Malaysia, Indonesia Size: 2” / 3”/ 4” Length: 8’, 10’-22’
Product of Chile, Canada, New Zealand, Romania & Brazil Width: 2”, 4”, 5”, 6”, 8”, 9”, 10”, 12” Thickness: 1”, 2”, 3”, 4” Length: 13’
Product of Europe Planks: 1”, 2”, 3” x 4” & above
Product of West Malaysia, Indonesia Size: 2” x 6”/ 8”/ 9”/ 10”/ 12” 3” x 6”/ 8”/ 9”/ 10”/ 12” 4” x 6”/ 8”/ 9”/ 10”/ 12” Length: 8’ and longer
Product of USA Planks: 2”, 3”, 4” x 6” & above
Product of Africa Planks: 1.5”, 2”, 2.5”, 3” x 6” & above
Product of USA Planks: 2”, 3” x 6” & above
Product of USA Planks: 2” x 6” & above
Product of Africa, Burma Square logs 10” x 10” x 10” & above Planks: 2”, 2.5”, 3”, 4” x 6” & above
Product of USA Planks: 2” x 6” & above
Product of USA, Canada Planks: 2
This is the most commonly used wooden board made of quality timber of which the core and outer layers are bonded with urea formaldehyde resin. It is the prime raw material in the furniture manufacturing industry with excellent feature for laminating, painting, and joinery works, widely used for paneling, partitions, interior decoration and in the fabrication of storage units, generally recommended for in-house applications only. Made in Malaysia, Indonesia, China, India Standard Sheet Size: 3’ x 7’, 4’ x 8’ Thickness (mm) 2.7 3.6 5.2 9 12 15 18 25
A new technology in plywood manufacturing to serve you better! By providing bendy layers inside, this venner-faced plywood can easily be bent both vertically and horizontally. This enables minimization of labour cost in applications where otherwise difficult takes of curved timber works are required. Widely used in columns and places where curved timber is an integral part of beautification. Cross Grain and Long Grain Made in Canada, Brazil Standard Sheet Size: 4’ x 8’ Thickness (mm) 3 5 8
Made from superior quality hardwood, this plywood is also resistant to fungus, termites, woodborers, moulds, rots and cockroaches. This is suitable for kitchens, bathrooms, separators, interiors, ceilings, doors, windows, back of laminates, partitions, etc. Made in Indonesia & India Standard Sheet Size: 4’ x 8’ Thickness (mm) 3.6 5.2 9 12 15 18
Offer in Hard Core, Combi Core and Poplar Core . Made in China. Standard Sheet Size: 4’ x 8’ Thickness (mm) 12 18
Species : Combi Core Size : 18mm x 1220mm x 2440mm (13Ply) Glue : WBP Film : Brown Imported Dynea Film Grammage : 120gms/m2 Thickness (mm) 12 18
With exotic surface of reconstituted veneers, these plywood panels exhibit attractive appearance with their distinctive grains and configurations. Available in a variety of surfaces like ash, oak, maple, rosewood, mahogany, burl, meranti, walnut, beech, cherry, etc. Highly suitable for lacquering, high glossy polishing, painting and staining. Used in a number of applications like panelling, partition works, door surfacing, furniture manufacturing and interior decoration. Made in Malaysia, Indonesia & Singapore Standard Sheet Size: 3’ x 7’, 4’ x 8’
Made in Indonesia, Malaysia, China. Both sides Melamine finish Melamine faced MDF boards available in White, Black, Red, Blue, Blonde Ash, Ivory Ash, Black Ash Grains, Almond Ash, Cherry, Silky Gray, Atlantic Gray, Golden Beech, Universal, Mahogany, Golden Teak, Jungle Teak, Sandy Beige, White Pearl, Rock Maple, Bird’s Eye Maple, Burl, Washed Oak, Apple Tree, Flame Beech and many more patterns. Standard Sheet size : 4’ x 8’ Thickness (mm) 6 9 12 15 16 18
The wood veneer faced MDF boards are a new option for top quality office or household furniture. All the brightness and warmth of the real wood are recreated on MDF board. Highest grade of veneer is used to get effects that are impossible using any other timber substitute. You get natural look with individuality of natural solid timber with variation in colour and grain structure Size 3’ x 7’ x 3mm 4’ x 8’ x 3mm 4’ x 8’ x 12mm 4’ x 8’ x 18mm
Made in Indonesia, Malaysia, New Zealand, Thailand, Chile, Germany, Romania, Brazil and Austria. MDF boards are suitable for furniture, cabinet, wardrobe. Hard. Suitable for edge bending. Routing operation. Standard Sheet Size: 4’ x 8’, 6’ x 8, 6’x 12’ Thickness (mm) 3 4 5.5 6 8 9 12 15 16 18
Moisture resistant MDF panel designed for use in humid conditions so is ideal for applications such as kitchen and bathroom furniture, window and skirting boards and architectural mouldings. Standard Sheet Size: 4’ x 8’ Thickness (mm) 3 4 5.5 6 8 9 12 15 16 18
•Manufactured in all MDF Melamine patterns on order. •Slot widths can be made as per customer requirement/sizes. •For patterns refer MDF melamine pages. Standard sheet size: 4’x8’ Slot width: 10cm, 15cm. Size 4 x 8 x 18mm Weight (Kg) Approximately 33
It is produced by mixing together wood, Portland cement, and non-toxic chemical additives; and pressing them into flat sheet with high pressure. It takes excellent properties from the two major contents, wood and cement. It is light, flexible, easy to work with, and has low heat conductivity like wood. It is durable, and weather resistant, safe from termite and fungi, and fire resistant like cement. It is excellent for both interior and exterior usage. Thickness (mm) 6 9 12 18 Size: 120cm x 240cm
• Light weight, easy to install, cost effective and environment friendly. • Maximum thickness of 25mm and maximum length up to 4.5 meter single board (less no of joints in partitions / less wastage and less joint filler) • Ready to take wide range of decorative finishes. • Suitable for internal construction, ceilings, partitions, wall linings & column cladding. • Provide better fire resistance, sound insulation & thermal insulation. Edge type: Recessed Edge (RE), Square Edge (SE) Size: 1200 x 2400 x 12mm, 1200 x 2400 x 9mm
• Suitable for high humidity and wet area applications such as bathrooms, kitchens etc. • The water resistant additives enhance the properties of moisture resistant when exposed to high degree of moisture. • Water absorption does not exceed 5% when immersed in water for 2 hours. • Suitable for internal construction, ceilings, partitions & wall linings. • Ready to take wide range of decorative finishes. • Provide very good moisture resistance and better fire resistance, sound insulation & thermal insulation. Edge type: Recessed Edge (RE) and Square Edge (SE) Size 120cm x 240cm x 12.5mm Weight (Kg) Approximately 27.01
• Light weight, easy to install, cost effective and environment friendly. • Expansion and contractin under normal atmospheric conditions is negligible. • The addition of glass fibres and other additive in the gypsum core improves the cohesive properties nad fire intergrity performance. • Provides greater fire resistance compared to that of a regular board. • Ready to take wide range of decorative finishes. • Suitable for internal construction, ceilings, partitions, wall linings & column cladding. • Provide better fire resistance, sound insulation & thermal insulation. Edge type: Recessed Edge (RE) and Square Edge (SE) Size 120cm x 240cm x 12.5mm Weight (Kg) Approximately 30.53
Size 1220 x 2440 x 4mm 1220 x 2440 x 3mm 1220 x 2440 x 1mm
Closed cell expanded polystyrene panels featuring excellent thermal insulation properties, high com- pressive strength and very low absorption. Density varies from 22kg to 50kg/m3. Extruded Polystyrene has high thermal and water resistance properties, providing uniform density dis- tribution, dimensional stability, very high compres- sive strength. The density varies from 32 to 50gk m3. Size: 60cm x 125cm x 25mm, 60cm x 125cm x 50mm
Polystyrene is a rigid, light thermoplastic, closed cell foam plastic. By controlling the density of the expanding beads during the manufacturing process, we can custom produce insulation and cushion- ing materials to the specific requirements of your applications. Size: 4’ x 8’ Thickness: 1/2”(12.5mm), 3/4”(20mm), 1” (25mm), 1.2”(30mm), 1.5”(37.5mm), 1.6”(40mm), 2” (50mm), 21/2”(62.5mm), 3” (75mm), 4” (100mm), 6” (150mm), 8” (200mm), 10” (250mm), 11”(280mm)
The blue extruded rigid foam made out of top quality general - purpose polystyrene. Manufac- tured by state - of - the - art computerized extru- sion machines according to international norms and standards, Roofmaster boards are made in a continuous skin surface and developed into a closed cell structure. This process allows high thermal resistance and superior water resistance properties. Roofmaster provides the uniform density distribution, dimensional stability, very high compressive strength, aging resistance, and also immunity against insects, pests, bacteria, and rodent attacks. It also provides good physical properties and long- term performance. Size: 50cm x 100cm x 50mm
Insulation Corkboard is a natural product obtained by expanding Cork granules into blocks under high pressure and temperature, + 300oC bonded by the cork’s natural resin. After steam baking the blocks are cut to required sizes. Mainly used in insulation of roofs, ceilings, terraces, garages, walls, founda- tions, swimming pools, subways, doors, ships and machinery. Size: 50cm x 100cm x 50mm
Insulation Softboard - Bitumenized can be used in all Expansion Joints including roofs. They have been used in hundreds of prestigious projects world-wide. They can used to meet even the most demanding of specification and will fully protect the waterproofing mem- brane from the most aggressive of backfill materials. As a protection board for membranes they play an integral part to the overall waterproofing specification, ensuring full protection and thereby maintaining the integrity of the water proofing system. Size: 122 X 220cm Thickness: 12mm, 18mm, 25mm
Insulation Softboard - Natural is a eucalyptus based softboard produced by a continuos wet lap process, followed by controlled drying. This board has excellent acoustic and thermal insulation characteristics due to a great number of minute interconnected air cells formed by its interwoven fibres. • Thermal insulating and acoustical material. • Low density core for doors and panels. • Lining insulating material for wall panelling. • Inexpensive ceiling. • It can be painted with any commercial paint. • Environmentally friendly product. Size: 122 X 244cm Thickness: 12mm
Insulation Softboard - Ivory Faced is a eucalyptus based softboard produced by a continuous wet lap process, fol- lowed by controlled drying. This board has excellent acoustic and thermal insulation characteristics due to a great number of minute interconnected air cells formed by its interwoven fibres. A softboard with a thin yellowish pine pup layer applied to one board face during the wet lap formation manufac- turing stage. This integral fibre layer is not a finish but a smooth base for paint application. Size: 122 x 244 x 12mm Made in Brazil
Our pre-engineered metal building insulation is a highly efficient, strong, resilient and easy to handle flexible blanket insulation composed of fine, stable and uniformly textured inorganic glass fibres bonded together by a non-water soluble and fire retardant thermosetting resin. It is from coarse fibres and shot due to its mineral composition. Application: Roofs and side walls of commercial, industrial, residential, agricultural buildings and poultry farms. Size: 1.1 x 20 metre Thickness: 5 cm
Mineral Fibre Ceiling Tiles Mineral fiber acoustic ceiling tiles are high-density boards which are two by two feet tiles in size, they are made of mineral fiber. Trend mineral fibre acoustic ceiling tile is the answer to better acoustics whose special feature is its excellent sound absorption quality and sound attenuation. It is highly durable & cost effective and has great aesthetic value. In addition it is very easy to install and requires no extra paint- ing/decoration post installation. Size: 60cm x 60cm x 15mm
SILENT is a range of products developed for floating floors and together with a suitably designed system nota- bly reduces the sound of footsteps on floor levels and trafficable coverings. The material is supplied in rolls and consists of a waterproofing layer coupled to an open cell polyester felt layer. The special compound and non woven polyester making up the product are formulated to reduce the sound of foots acoustic energy as heat making it possible to use the membrane even at very low temperatures thanks to the plasticity of the bituminous membrane. The waterproofing layer not only protects the sound resilient element from mechanical stress when the cement slab is cast but on completion also protects the system from water infiltration.The smooth polyethylene sheet to finish is easy to clean during laying. FIELDS OF APPLICATION • Acoustic insulating of floating floors in new buildings • Restoration of flooring in existing buildings • Covering for pedestrian traffic Size: 8.5 mm x 1 metres x 10.05 metres
Rock wool is an insulation material, light in weight, made up of intermingled vitreous fibres composed of complex silicates. It is available in various forms like Loose Wool, Preformed Mattresses, Slabs and Pipe Sections bonded with thermosetting resin conforming to IS, ASTM, BS, JIS, DIN standards. All the forms of Rock Wool are incombustible, fire retardant, moisture resistant, chemically inert, neither cause nor ac- celerate corrosion, durable and do not sag and settle, are colourless friendly to handle and easy to apply. It also resists the spread of flame to any material which it covers. Size: 60 x 120 x 5 cm Density: 30KG/M3, 35KG/M3
For functional as well as aesthetic reasons, aluminium sheets are the most preferred material from simple houses to more complex industrial sheds and warehouses. It is non- combustible, non-flammable metal and resists fire. It also resists corrosion because of the thin hard aluminium-oxide coating. Length : 8’, 10’, 12’ Width : 32” Thickness : 0.4mm, 0.5mm, 0.7mm
A very attractive translucent roofing sheet made of re-inforced glass fibre. Highly durable and light weight. Fairly resistant to heat, corrosion and weather variations. Water-proof and anti- termite. A highly required sun light medium in asbestos and metal roofing systems. Length : 8’, 10’, 12’ Width : 32”, 42” (Big Corrugation) Thickness : 1.0mm Colores : White, Green, Blue, Clear White.
Attractive translucent medium available in elegant colours to beautify your surroundings. Made of fine plastics, it can be used in interior and exterior decoration, garden houses, pavilions etc. Length : 6’, 8’, 10’, 12’ Width : 30” Thickness : 0.7mm Colors : White, Transparent White, Green, Transparent Green, Blue, Transparent Blue, Transparent Red, Transparent Yellow
A purpose-oriented corrugated sheet made of selected quality Galvanized Iron (G.I.) with excellent features for roofing and side clading. Packed in sea-worthy envelopes. Length : 6’, 6.5’, 8’, 10’, 12’ Width : 32”, 39” Thickness : 28, 30, 32, 34, 35, 36 Gauge Complete fixing accessories are also available.
Twin Wall Polycarbonate sheets are high performance, tough and safe wall glazing material. These comprises thin rectangular wall tunnel structure and offers high impact strength , light transmission , all weather compatibility with excellent thermal insulation properties. Due to its light transmission, profile structure, ability to withstand extreme temperatures and long life these are extremely ideal for new and replacement greenhouse glazing and other similar uses where external lighting is used for internal lighting purposes. Length : 5.8mtr, 11.8mtr Width : 2.1mtr Thickness : 4mm, 6mm, 10mm. Colores : Clear, White, Green, Blue, Brown.
Metal roofing tiles (Stone Chips Finished Tiles) give a natural look for your home. The additional stone chips coating enhances durability and gives an artistic touch for better living.
Metal colour tiles come in different colours with high quality polyester paint. It offers excellent durability and dynamical look for roofing Effective Gardenia Green length : 1120 mm Effective width : 375 mm Tolerance : +5 mm Effective Cover Area : 0.42 m2 Tiles / m2 : 2.38 lbr/m2 Weight /m2 : 2.63kg /m2
Cement Corrugated sheets are manufactured in accordance with the requirements of strengths specified in European standards DIN EN 494. Size: 1.05mtr x 2mtr x 6mm, 1.05mtr x 2.5mtr x 6mm, 1.05mtr x 3mtr x 6mm
Aluminium Zinc coated steel profile sheets 0.7 to 0.9mm. thick as per ASTM A792 for Aluminium Zinc - different grades can be supplied on request. Aluminium profiled sheet is 0.7mm.up to 0.9mm. thick Alloy A3105 - H16 Temper from tension leveled coils - different Alloy can be supplied on request. Yield Strength 170 N/mm2 (Aluminium) Yield Strength 250 N/mm2 (Steel) Size: 1025mm x 3000mm x 0.7mm, 0.8mm, 0.9mm
G.I. steel profiled sheets 0.7 to 0.9mm. thick as per ASTM A656 for GI - different grades can be supplied on request. Painting is baked regular modified enamel polyester, with 5 micron primer and 20 micron coat on the weathering side and 5/7 micron primer on the reverse w PVDF, Silicon, Modified Polyester, Plastisol & ARS coating on request is applicable. Size: 1025mm x 3000mm x 0.7mm, 0.8mm, 0.9mm Colour: Red, White Coated
Size: 42cm x 24cm
BITUSTICK is a self adhesive polymer modified bituminous, waterproofing sheet membrane, laminated onto a tough HDPEfilm on one side and a silicone release filmon the other. Bitustick conforms to the re- quirements of BS 8102. mm x 1 metre x 10 metres 1.5 mm x 1 metre x 10 metres 2 mm x 1 metre x 10 metres
Used in single layer as dampproofing for bathrooms and structural elements that are below ground, or in layers for tanking in basements. It also can be used for a wide range of waterproofing applications including roofs, reservoirs, tunnels, etc.
